>After
more than 25 years of experience with detector-based systems on
varioubulk goods the first generation of WMS compact sorting
systems was developed by WMS in 2004, and these have been
continuously improved and upgraded. Since 2010 we have been
deploying the new system designed according to our own
specifications, the imaging multiple
spectrum detectors MD900 CED™-HSI.
The fourth generation of this compact sorting systems has been in operation since
2014.
The features of the compact sorting system:
- Wide product spectrum sortable
- Shredder fractions (light/heavy)
- Mixed metals
- Separation of light and heavy metals
- Electronics and electrical waste and scrap (WEEE)
- Metal removals of various residual fractions (e.g. incinerator bottom-ash)
- incinerator bottom-ashes (IBA)
- Plastics
- Wood
- High capacity up to 100 t/h, resp. up to 60 m³/h
- Various sorting programs available: ranging from "All metals" to selective removal of substances, everything is possible
- Low energy requirements at maximum shot
power (up to 5,400,000 shots per minute)
- specially developed efficient pressurized air management
- specially modified volume flow air pressure system
- Minimized over-sorting by extreme shot precision
- Optimized accessibility to the various system modules and components
| X-ray detector XD400/800 | Optical detector OD900 | Multiple spectrum detector Detektor MD900 CED™ -HSI | |
|---|---|---|---|
| Width | 1,400 cm | 1,400 cm | 1,400 cm |
| Height | 1,768 cm | 1,900 cm | 1,900 cm |
| Length | 4,625 cm | 4,300 cm | 4,300 cm |
| Weight | 5,300 kg | 1,900 kg | 1,600 kg |
Sorters can be equipped with customized detector combinations:
- X-ray
detector XD400/800
- Density separation (diamonds / gold ores / aluminum sorting)
- Optical
detector OD900
- Color sorting (plastics)
- Separation non-ferrous metals (copper / brass)
- Multiple
spectrum detector MD900 CED™-HSI
- stainless steel
- non-ferrous metals
- cables
- all other metals
Produktbeispiel Kompaktsortierer mit MD900 CED™-HSI
Separation of stainless steel / INOX from eddy current waste at Thommen AG Switzerland
- Recovery:
- ≥ 98 %
- Purity:
- ≥ 99 %
(guaranteed quality: compliance with the smelter limit of 50g lead per ton INOX)- Capacity:
- > 9 t/h
- Stainless steel content:
- > 20 weight %
- Staff required for quality control:
- 1
- Pressurized air:
- 2-4 bar
- Energy consumption:
- 15 kW
Input material from eddy current waste
Output belt stainless steel / INOX
End product stainless steel / INOX
Product images
WMS IV compact sorting system in MD900 CED™-HSI version
WMS IV compact sorting system in XRT version XD400